If renovating your kitchen is on your mind, replacing your kitchen sink should also be a task in your list. Replacing the basic yet largely useful components of your kitchen such as the sink and faucets can give your kitchen a quick makeover and also lower the chances of various plumbing problems in the future. If you are already planning for kitchen sink replacement, you must keep several things in mind. Some of the major things are listed below.

1. Right type of kitchen sink

Several types of kitchen sinks are available in the market. Select the one that suits your needs and preferences. The main types of sinks include:

Drop-in/Topmount Sink

These sinks have edges that directly sit on the cutout. These are the easiest to install as all you have to do is find one sink that exactly fits in the sink cutout. They can be lifted easily to clean the area. They are relatively inexpensive.

Integral Sink

These sinks come in combination with the entire countertop and provide a seamless look. Being fixed with the countertop, replacing these kitchen sinks are difficult as you will have to replace the entire assembly. Needless to mention, these are the most expensive of all the types.

Undermount Sink

These sinks are installed under the counter by sealing the edges of the sinks to the counter cutout. These are the most easy-to-use and clean sinks and are moderately expensive, depending on the material you choose.

2. Ensure To Fill The Space

Just because you like a particular sink, don’t select and buy it blindly. Make sure you measure the counter cutout accurately and find the sink that can fit in it. A sink that is too small for the cutout will leave gaps and provide space for rodents to move around. On the other hand, a sink that is too big won’t fit and you’ll end up wasting money.

3. Measure The Sink Tailpiece

If you buy a kitchen sink that has a very deep sink bowl, it won’t drain properly. In such a case, you will have to remodel the entire waste assembly and the drain line inside the wall. This will be both, time-consuming and expensive. Hence, measure the space between the sink strainer and the connection of the sink and the drain. That measurement is the extra depth that can be added to the sink bowl without lowering the assembly.

4. Clear The Waste Assembly

Before the kitchen sink replacement, make sure you clear the waste assembly that consists the garbage disposal and the drains. Remove the food and debris leftover and the sediments so that you don’t have to open the entire assembly too soon after installing the new kitchen sink.

Always choose the experts such as our professional plumbers in Edmonton for replacing your kitchen sink or installing a new one. We ensure to provide the best results so that you can use your kitchen effortlessly for decades to come.

Comments 0

Leave a Comment